Attribute
Product Description
Manufactured with highly efficient “I” shaped extruded bearing bars, type SGI aluminum grating carries the same load as 3/16” thick rectangular bar type SG grating.The I-bar reduces total weight per square foot and the striated flanges provide increased slip resistance without the added cost of serration.
Supported by I-shaped extruded bearing bars, swaged I-bar aluminum grating carries the same load as the swaged rectangular aluminum grating with lighter weight and less costs. In addition, the striations at the top and bottom surfaces of the I bar increase the friction and provide high slip resistance performance
Specification
Bearing bar size: 1" x 1/4" to 2–1/2" x 1/4" with 1/4" increments;
Bearing bar spacing (center-to-center): 1–3/16", 15/16", 11/16" and 7/16";
cross bar spacing (center-to-center): 4"or 2".
Application
Because of its light weight, corrosion resistance, and non-sparking, Aluminum gratings are widely used in indoor ceilings, outdoor curtain walls and other decorative applications due to its lightweight, excellent corrosion resistance and non-sparking properties. It is suitable for industrial applications where the strength-to-weight ratio is important, such as wastewater treatment plants. It is mainly used for safety protection and served as walkways, floors, platforms, stair treads, fences, etc.